ADVANCED OPERATION
DTMF AUTODIALER OPERATION
The speed at which the DTMF digits are sent can be changed. Two speed levels are avail- able: Low (10 digits per second) and High (20 digits per second: default). To toggle between Low and High speed, use the following procedure:
1.Press and hold in the [MHz(SET)] key for one second, then rotate the DIAL knob to select “11 DT SPD.”
2.Press the [MHz(SET)] key, then rotate the DIAL knob to select the desired speed (“50”: High speed or “100”: Low speed).
3.Press and hold in the [MHz(SET)] key for one second to save the new setting and exit to normal operation.
You can also set a longer delay between the time your transmitter is keyed and the first DTMF digit is sent. To set the delay time, use the following procedure:
1.Press and hold in the [MHz(SET)] key for one second, then rotate the DIAL knob to select “09 DT DLY.”
2.Press the [MHz(SET)] key, then rotate the DIAL knob to select the desired speed (50/ 250/450/750/1000 ms).
3.Press and hold in the [MHz(SET)] key for one second to save the new setting and exit to normal operation.
29 |