Using The Tracker Paging System

To use Tracker to transfer a call to a park orbit for retrieval and transmit the call’s park orbit code and caller ID information (if available)

1.Answer a call.

2.FLASH the hookswitch.

3.Dial station number of station that is to receive the call.

4.If the user at the called station does not answer or the station is busy, dial * 8.

5.Hear confirmation beep (Tracker page accepted) or busy tone (Tracker page not accepted).

6.Hang up handset.

)Tracker parked calls will re-ring your station if the called

party does not respond within a preprogrammed time. You can either replace the call into another Tracker page orbit or retrieve the call for servicing.

• To retrieve a call that you parked using the Tracker option

—Lift handset and FLASH the hookswitch,

– OR –

—Lift handset, listen for dial tone, and dial # #.

12.1 Responding To Tracker Pager Calls

• If you receive a parked call message on your Tracker pager

1.Go to any system station.

2.Lift handset and listen for intercom dial tone.

3.Dial the orbit code (#800–#899) displayed on your pager.

4.Retrieve call.

24

Comdial

September, 02

Page 28
Image 28
Vertical Communications DSU II manual Responding To Tracker Pager Calls