6 | Conferencing Calls |
|
6.1Conferencing Stations Together
•To conference any combination of inside stations and outside lines,
1.Make first call.
2.Press TRANSFER/CONFERENCE.
3.Make next call and press TRANSFER/CONFERENCE to establish conference.
4.Repeat the last two steps to add up to two more parties.
NOTE: When setting up a conference call with outside lines and inside stations, you must call the outside lines first. Use the line group access codes to place the outside lines in your conference.
•To drop outside lines from the conference,
1.First press HOLD to place all calls on hold (not doing this will result in a tone burst interrupting the remaining conferees).
2.Once all calls are on hold, press the line that you wish to bring back to the conference.
3.Use steps two and three to bring back each line from hold.
