Programming Your Telephone |
•
•
•
To receive a message at an alerted station,
1.Observe flashing HOLD or MESSAGE light.
2.Press INTERCOM, then HOLD; or MESSAGE (connection to station that left message is automatic).
To turn on the message waiting light at another station,
1.Press INTERCOM ✳ 3, or MESSAGE.
2.Dial extension number of station to be alerted (the message waiting light of called station will flash).
To turn off the message waiting light at another station,
1.Press INTERCOM # 3, or MESSAGE.
2.Dial extension number of station that was alerted (the message waiting light of called station will turn off).
•To turn off the message waiting light during
1.Press INTERCOM.
NOTE: Any station, if programmed with “Message Wait Originate,” can have this messaging capability.
8 – 2