Vertical Communications R DSU manual Programming Your Telephone, To store autodial numbers

GCA70–248Programming Your Telephone

9	Programming
	Your Telephone

9.1Programming Your Telephone

•To store autodial numbers,

1.Press INTERCOM and dial ✳ ✳ 1.

2.Press programmable button.

3.Press line button, or dial 1, 2, 3, or 4, to select line groups 1–4 , or dial 0 for system to select line.

4.Dial number to be stored (16 digits maximum).

To store hookflash in an autodial sequence, press TAP; press HOLD to store pause (only if needed).

5.Press TRANSFER/CONFERENCE, then press next programmable button, and dial another number to be stored.

6.Repeat previous step until finished then press SPEAKER.

NOTE: You can store an autodial number at a second level at a DSS button if you wish.

•To store extension numbers at DSS buttons,

1.Press INTERCOM and dial ✳ ✳ 3.

2.Press programmable button.

3.Dial extension number.

4.Press next programmable button and dial another extension number.

5.Repeat previous step until finished then press SPEAKER.

Non-LCD Station User's Guide 9 – 1