Vidikron VERSION 50 manual Connector Panel, Built-In Control Panel

Controls and Functions

Connector Panel

To access the connector panel, press the door release button so it pops out. Turn the knob clockwise or counter-clockwise and pull firmly on it to open the door.

(G) Y	(B)PB/CB			(R)PR/CR			H	V
Y (G)	B	B	BP	R	R	(R)P	H	V
		/C			/C

12V

OUT

OUT 12V

1.HDMI (High-Definition Multimedia Interface) Input Digital video signal input

2.Component (RCA Jacks)

480i Component (Y/CB/CR) video signal input

3.Video (RCA Jack) Composite video signal input

4.S-Video (mini DIN 4-pin) Y/C (S-video) signal input

5.RS-232C (RJ-11 Jack)

RS-232C control signal input (refer to page 51 for details)

6.12v Trigger (mini jack, diameter 5.5 mm outside, 2.5 mm inside) +12V output, active when the projector is turned on

7.RGB/ HDTV (BNC) or Progressive Scan DVD players DTV Y/PB/PR or DTV RGB video signal input

Built-In Control Panel	To control the projector when signals
	from a remote control cannot reach
	it, use the built-in keypad next to
	the connector panel.
	Because the built-in keypad has
	fewer keys than the remote keypad,
	certain projector functions are
	accessible only through the menu
	system rather than via a direct key.

ZOOM+	MENU	SOURCE	POWER
	/EXIT	/ENTER
ZOOM+	/EXIT	/ENTER	POWER
	MENU	SOURCE
	MEMORY	LENS
ZOOM-		SHIFT
-ZOOM	MEMORY	SHIFT
		LENS

14 Vidikron Vision Model 50 Owner’s Operating Manual