Vidikron VERSION 50 manual Basic Operation, Turning on the Power

•Turn on the main power switch on the rear of the projector. The POWER LED will light orange.

•Press the ON button on the remote control to turn on the projector. The POWER LED flashes orange during the warm up period, then lights solid green.

•“Searching….” appears on the screen before the projector identifies the input signal, and remains there until a valid signal is detected.

•If an incompatible input signal exceeds the range of the projector, a “No signal supported” message appears on the screen. This message remains on the screen until you change the input signal.

•Press ZOOM and the arrow buttons (◄/►) to adjust the projected image size.

•Press FOCUS and the arrow buttons (◄/►) to focus the image.

•Press LENS SHIFT and the arrow buttons (▲/▼) to adjust the lens vertically.

•To adjust the projector height or projection angle, or to compensate for a mounting surface that isn’t level, turn the four adjustable feet on the bottom of the projector.

Basic Operation

Turning on the Power

OFFON

COMP 1	S-VID	VIDEO
COMP 2	RGB HD	HDMI

Adjusting the Zoom,

Focus and Lens Shift

Adjusting Projector

Height or Projection

Angle

Vidikron Vision Model 50 Owner’s Operating Manual 29