
Installation
3.4
Connections to the DView
Proceed as follows to connect the DView to your video sources, external controller(s) – if present – and AC power.
When connecting your equipment:
•Turn off all equipment before making any connections.
•Use the correct signal cables for each source.
•Ensure that the cables are securely connected. Tighten the thumbscrews on connectors that have them.
•Use the left audio input when connecting mono audio sources.
Rear Connector Access ➤ | To access the left rear connector panel, push down on the plastic clip holding the cover in |
| place. Then, pull firmly on the cable access cover to open it. |
Connecting the DView to ➤ | Connect your video sources to the DView as shown and described in the sections that follow. |
Source Components | Antenna/Cable TV Connection: Connect your antenna or cable television source to the AIR |
| |
| or CABLE jacks on the rear of the DView; see Figure |
Input Panel
Cable Television
Network
Figure 3-1. Antenna/Cable TV Connection
16 | Vidikron |