Vidikron VL-40 manual Connecting External, Speakers Optional

			Installation
The DView is equipped with stereo speakers, which are mounted directly below the screen. If			Connecting External
you prefer, you can connect the rear-panel speaker outputs to external speakers.			Speakers (Optional)
Connect the	(positive) and	(negative) speaker wires to the rear-panel SPEAKER-R and

SPEAKER-L terminals; see Figure 3-8. Maintain the correct polarity. For more information, refer to the owner’s manual for your speakers.

Twist exposed wire strands together.

Push tab to the
open position, and
insert the wire.
Then, close tab firmly to
secure the wire in place.	Right Speaker	Left Speaker

Figure 3-8. External Speaker Connection

You can also remove the built-in speakers if they are not needed; this permits installation of the display in locations where space above and/or below it is very limited. See Figure 3-9.

Remove these screws to allow the speakers to be detached.

Figure 3-9. Removing the Built-in Speakers

Vidikron VL-40 and VL-46 Owner’s Operating Manual 21