Vidikron VP-6000a, VP-4200a, VP-5000a manual Monotone, Contrast

Serial Communications

Table 6-1. Serial Commands (continued)

	Command		Value Range		Description
ASCII		HEX	Minimum	Maximum
FMKS00	46	4D 4B 53 30 30	–	–	Sets the TEST PATTERN to OFF.
FMKS02	46	4D 4B 53 30 32	–	–	Sets the TEST PATTERN to INVERSE
					(negative-positive inversion).
FMKS03	46	4D 4B 53 30 33	–	–	Turns ON the WHITE test pattern.
FMKS04	46	4D 4B 53 30 34	–	–	Turns ON the RED test pattern.
FMKS05	46	4D 4B 53 30 35	–	–	Turns ON the GREEN test pattern.
FMKS06	46	4D 4B 53 30 36	–	–	Turns ON the BLUE test pattern.
FMKS07	46	4D 4B 53 30 37	–	–	Turns ON the YELLOW test pattern.
FRCS00	46	52 43 53 30 30	–	–	Sets FRC to SCALER.
FRCS01	46	52 43 53 30 31	–	–	Sets FRC to NORMAL.
GSL	47	53 4C	000	255	Adjusts the GREEN sidebar level.
IDC	49	44 43	–	–	Clears the display ID number (resets to
					“ALL”); for example, 01IDC.
IDS	49	44 53	–	–	Sets the display ID number; for example,
					01IDS sets the display ID to 01h.
					Note: IDS only works if the display ID
					number has been cleared (with IDC) or has
					not been previously assigned.
IPRS01	49	50 52 53 30 31	–	–	Sets the DISPLAY PROFILE to NORMAL.
IPRS02	49	50 52 53 30 32	–	–	Sets the DISPLAY PROFILE to PURE.
IPRS03	49	50 52 53 30 33	–	–	Sets the DISPLAY PROFILE to
					MONOTONE.
IPRS04	49	50 52 53 30 34	–	–	Sets the DISPLAY PROFILE to HIGH
					CONTRAST.
LESS00	4C 45 53 53 30 30		–	–	Sets FRONT L.E.D. to OFF.
LESS01	4C 45 53 53 30 31		–	–	Sets FRONT L.E.D. to ON.
OSDS00	4F 53 44 53 30 30		–	–	Sets OSD DISPLAY to OFF.
OSDS01	4F 53 44 53 30 31		–	–	Sets OSD DISPLAY to ON.
OSSS01	4F 53 53 53 30 31		–	–	Sets OSD SIZE to LARGE.
OSSS02	4F 53 53 53 30 32		–	–	Sets OSD SIZE to SMALL.
Notes:

1.When making input-specific adjustments such as to image quality, screen position/size or audio sub-volume, select the input you wish to affect before making such adjustments.

2.These settings are not stored in memory.

62 Vidikron PlasmaView Owner’s Operating Manual