Vidikron VP-5000a, VP-6000a, VP-4200a manual Command Value Range Description, Minimum

Serial Communications

Table 6-1lists the PlasmaView serial command set. Except where indicated, adjustments made using serial commands are stored in the same memory as those made in Installer Adjust mode.

Table 6-1. Serial Commands

	Command				Value Range		Description
ASCII			HEX		Minimum	Maximum
						Power
POF	50	4F 46			–	–	Power OFF.
PON	50	4F 4E			–	–	Power ON.
					Input Select (Note 1)
IN1	49	4E	31		–	–	Switches the main screen to INPUT1.
IN2	49	4E	32		–	–	Switches the main screen to INPUT2.
IN3	49	4E	33		–	–	Switches the main screen to INPUT3.
IN4	49	4E	34		–	–	Switches the main screen to INPUT4.
IN5	49	4E	35		–	–	Switches the main screen to INPUT5.
INPS01	49	4E	50	53 30 31	–	–	Switches the main screen to INPUT1.
INPS02	49	4E	50	53 30 32	–	–	Switches the main screen to INPUT2.
INPS03	49	4E	50	53 30 33	–	–	Switches the main screen to INPUT3.
INPS04	49	4E	50	53 30 34	–	–	Switches the main screen to INPUT4.
INPS05	49	4E	50	53 30 35	–	–	Switches the main screen to INPUT5.
SSIS01	53	53	49	53 30 31	–	–	Switches the sub screen to INPUT1.
SSIS02	53	53	49	53 30 32	–	–	Switches the sub screen to INPUT2.
SWM	53	57	4D		–	–	Outputs main input to the full screen.
SWS	53	57	53		–	–	Outputs sub input to the full screen.
					Aspect Ratio
AST	41	53	54		–	–	Executes AUTO SETUP on Input 1.
SZMS00	53	5A 4D 53 30 30			–	–	Sets the aspect ratio to PIX by PIX.
SZMS01	53	5A 4D 53 30 31			–	–	Sets the aspect ratio to Standard 4:3.
SZMS02	53	5A 4D 53 30 32			–	–	Sets the aspect ratio to ANAMORPHIC
							16:9.
SZMS03	53	5A 4D 53 30 33			–	–	Sets the aspect ratio to LETTERBOX.
SZMS05	53	5A 4D 53 30 35			–	–	Sets the aspect ratio to INTELLIWIDE.
Notes:

1.When making input-specific adjustments such as to image quality, screen position/size or audio sub-volume, select the input you wish to affect before making such adjustments.

2.These settings are not stored in memory.

54 Vidikron PlasmaView Owner’s Operating Manual