ViewSonic PJL6233, PJL6223 warranty Appendix Indicators and Projector Condition

Appendix

Indicators and Projector Condition

Check the indicators for projector condition.

Indicators

POWER	WARNING	/$03	Projector Condition
		5(3/$&(
red/green	red	yellow
			The projector is off. (The AC power cord is unplugged.)
		¼	7KHSURMHFWRULVLQVWDQGE\PRGH3UHVVWKH2167$1'%<EXWWRQ
			to turn on the projector.
		¼	The projector is operating normally.
			7KHSURMHFWRULVSUHSDULQJIRUVWDQGE\RUWKHSURMHFWLRQODPSLV
		¼	being cooled down. The projector cannot be turned on until cooling
			is completed and the POWER indicator stops blinking.
		¼	The projector is in the Power management mode.
			The temperature inside the projector is abnormally high. The
			projector cannot be turned on. When the projector is cooled down
		¼	enough and the temperature returns to normal, the POWER
			indicator stops blinking and the projector can be turned on. (The
			WARNING indicator keeps blinking.)
			The projector has been cooled down enough and the temperature
		¼	returns to normal. When turning on the projector, the WARNING
			indicator stops blinking.

The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, unplug the AC power

¼cord and contact the dealer or the service center for service and checkup. Do not leave the projector on. It may cause an electric

VKRFNRUDILUHKD]DUG

‡‡‡JUHHQ	‡‡‡UHG	‡‡‡RII
‡‡‡EOLQNVJUHHQ	‡‡‡EOLQNVUHG

¼:KHQWKHSURMHFWLRQODPSUHDFKHVLWVHQGRIOLIHWKH/$035(3/$&(LQGLFDWRUOLJKWV\HOORZ:KHQWKLV

LQGLFDWRUOLJKWV\HOORZUHSODFHWKHSURMHFWLRQODPSZLWKDQHZRQHSURPSWO\SS