ViewSonic PJL6233, PJL6223 Filter counter, Factory default, This icon also appears at turning on

Setting

Filter counter

This function is used to set a frequency for the filter cleaning.

When the projector reached a specified time for cleanings, a Filter warning icon appears on the screen, notifying the cleaning is necessary. After cleaning the filter, be sure to select Reset and set the timer. The Filter warning icon will not turn off until the filter counter is reset.

For details about resetting the timer, refer to “Resetting the )LOWHU&RXQWHU´RQSDJH

Fig.1 Filter warning icon

Filter warning icon appears on the screen at a set time.

3Note:

This icon also appears at turning on.

3Note:

The Filter warning icon (Fig.1) will not appear when the Display function is set to OffSGXULQJFreeze(p.25), or No showS

Warning log

This function records anomalous operations while the projector is in operation and use it when diagnosing faults. 8SWRZDUQLQJORJVDUHGLVSOD\HGZLWKWKHODWHVWZDUQLQJ message at the top of the list, followed by previous warning messages in chronological order.

3Note:

:KHQWKH)DFWRU\GHIDXOWIXQFWLRQLVH[HFXWHGDOOWKH warning log records will be deleted.

Factory default

7KLVIXQFWLRQUHWXUQVDOOVHWWLQJYDOXHVH[FHSWIRUWKHUser logo, PIN code lock, Logo PIN code lock, Lamp counter and Filter counter to the factory default settings.

Filter counter

3UHVVWKH6(/(&7EXWWRQWRVHOHFWTimer, and then use

the Point Ÿźbuttons to set the timer. Select from (Off/ 100H/ 200H/ 300H) depending on the use environment.

Factory default

Factory default

57