ViewSonic PJL6223, PJL6233 warranty Why cant be turned on/off with web browser?, Ting

Q&A

Operation

QWhy can't be turned on/off with web browser?

APlease make sure the settings of the projector are correct to use the projector.

Please set the Standby mode of the projector's Setting menu to "Network". Refer to "4. Controlling the Projector" "Power control and status check" ( pp.32 - 33).

QWhy can't I change the controls in the setting page with web browser?

APlease make sure the projector is turned on. If it is in the standby mode, the setting

is not effective to the projector. To control the projector with a web browser, the projector must be in the powered-on condition.

QWhy does it sometimes take a lot of time to complete the page display?

AThe display speed of the page depends on the network environment in which both

the projector and computer are placed. It may take much time to complete the page display if network traffic is heavy. Please consult your network administrator.

QHow many numbers of the E-mail address can I register in the E-mail set-

ting page.

AYou can register up to 10 addresses.

QWhy am I not receiving E-mail alert messages?

AMake sure that the registered E-mail address and SMTP server address are correct. If

the SMTP server is located in your LAN (Local Area Network), the address should be set to the SMTP server in your LAN. The SMTP server located outside of your LAN

may not be available for security reason. For further information please contact your	ENGLISH
network administrator ( p.25).

55