Panasonic DMR-EZ47VEB  to select Rec to DVD, then  to select Rec, then OK, DV Auto Rec

Recording from a DV Camcorder

Connect the cable while both the unit and the external device are turned off.

Front of the unit

IN 2 S VIDEO VIDEO L /MONO AUDIO R

4-pin DV Cable

[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]

Preparation:

Turn on the unit.

[RAM] If the disc is protected, release protection (¼ 56).

When the output signal from the external device is

NTSC, change the “TV System” to “NTSC” in the Setup menu (¼ 63).

When recording bilingual programmes (¼ 61)

DRIVE

SELECT to select the DVD drive.

−Insert a disc (¼ 72).

−External DV cannot be recorded to VHS.

REC MODE

to select the recording mode (¼ 20).

Turn on the DV equipment and pause play on the DV equipment at the point you want recording to start.

“DV Auto Rec”	DV Auto Rec
	DV unit is connected.
screen may appear.
	Record from the DV unit?
	Rec to DVD	Cancel
	SELECT
	OK	RETURN

When “DV Auto Rec” screen does not appear

Perform steps –(¼ above).

1.With the unit stopped Press [FUNCTION MENU].

2.Press [, ] to select “To Others”, then press [OK].

3.Press [, ] to select “DV Auto Rec”, then press [OK].

You can proceed to step  (¼ right).

 to select “Rec to DVD”, then

OK

 to select “Rec”, then OK

Notes

 When timer recording starts while recording from an external device, timer recording takes priority and recording from the external device stops.

 If the desired audio is not recorded, select the kind of audio for “Audio Mode for DV Input” in the Setup menu (¼ 61).

 [RAM] Programmes are recorded as a single item; breaks in the
images create chapters and playlists are created automatically.
 If you use video camcorders from other manufacturers, these are
not guaranteed to work.
 It is not possible to operate the unit from the connected DV
equipment.
 The DV equipment name may not be shown correctly.
 Date and time information is not recorded, even if displayed on
the camcorder.
 The DV IN terminal is not meant to be connected to a computer.	Features
 This unit uses a 4-pin “DV IN” connector;
Your DV camcorder may use a 4-pin or 6-pin external connector.
Please consult your DV camcorder’s manufacturer to confi rm
correct external connection.	Advanced
 You cannot record and play simultaneously.

Tips

When recording finishes

The confi rmation screen appears.

Press [OK] to fi nish DV camcorder recording.

To stop recording

Press [ STOP].

The confi rmation screen appears. Press [OK].

If the DV camcorder recording function does not work properly, check the connections and DV equipment settings, and turn the unit off and back on. If that does not work, follow the instructions on page 24.

25

RQT8857