Panasonic DMR-EZ47VEB quick start Inserting Discs, Disc Care

Disc Handling

Inserting Discs

Press [ OPEN/CLOSE] to open the tray.

–Insert a disc.

Insert label-up.

Press [ OPEN/CLOSE] to close the tray.

Notes

When using 8 cm DVD-RAM or 8 cm DVD-R, remove the disc from the cartridge.

It is not possible to record or play continuously from one side of a double sided disc to the other. You will need to eject the disc and turn it over.

Automatic drive select function

[RAM] [Only for discs with the write-protect tab on the cartridge set to “PROTECT” (¼ 56, Setting Protection)]

[DVD-V] [VCD] [CD]

If the unit is stopped, it automatically switches to the DVD drive when a disc is inserted.

Disc Care

[RAM] Use cartridges to protect them from scratches and dirt.

Holding a disc

Handle discs by the edges to avoid inadvertently scratching or getting oil from your fi ngers on the disc. Do not touch the signal surface of discs (the shiny side).

Cleaning discs

Discs are not indestructible and occasionally dirt or condensation may appear. Clean by gently wiping with a soft, dry lint-free cloth in a straight line from the centre of the disc to the edge of the disc. Return discs to their cases when not in use; this helps to protect against scratches and dirt.

Storing discs

Do not place or store discs in the following locations:

–Direct sunlight

–Very dusty or humid areas

–Near a heat source

–Places that undergo extreme shifts in temperature (condensation can occur)

–Where static electricity or electromagnetic waves occur

72

Discs to avoid

Discs that are not perfectly circular in shape

Warped discs, which may not balance properly in your unit, causing improper operation or damage to the unit

Cracked discs

Discs with exposed adhesive (from removed stickers or labels, such as may occur with rental discs or improperly cared-for discs that were previously labeled or re-labeled)

RQT8857