Panasonic DMR-EZ47VEB To delete, To modify the programme , ,,to make changes, then OK

Advanced Timer Recording

Check, Change, or Delete Programmes

The timer recording list can be viewed even when the unit is off.

PROG/CHECK

–See “Tips” (¼ right) for explanation of icons displayed.

,  to select the programme.

DELETE

to delete.

–You cannot delete programmes that are currently recording.

OK

to modify the programme.

, ,,to make changes, then OK

Notes

Recording may fail if there are changes to the station’s programming.

“” disappears from the unit’s display when no timer programme is set or when all timer programmes are deactivated.

Tips

You can enter up to 16 programmes a month in advance.

￿

Timer	Remain	DVD	1:58 SP
Recording		VHS	--:---- 12:56:00	15/ 7. TUE
No. Name	Date	Start	Stop Drive Mode	Drive
				STTL space

New Timer Programme

￿

Press OK to store new programme.

OK

RETURN

Timer Recording screen icons

: Timer programme is active.

: Currently recording

: Programmes are overlapped. Recording of the programme with the later start time starts when the earlier programme fi nishes recording.

: You stopped a weekly or daily timer recording. The icon disappears when the next timer recording starts.

: The disc was full. (not enough space)

: The TV programme may not be recorded due to copy-protect.

: Recording stopped (Dirty disc or video cassette, etc.)

Drive Recording drive is set to DVD or VHS

Drive space

OK: Recordable [DVD]

¼(Date):For recordings made daily or weekly, the display will show until when recordings can be made (up to one month ahead from the present time) based on the time remaining on the disc. [DVD]

!: It may not be possible to record because:

−The disc is write-protected. [DVD]

−There is no more space left. [DVD]

−The number of possible titles has reached its maximum. [DVD]

−The new timer recording will completely or partially record over this timer recording.

The timer recording was not performed or completed for the following reasons:

−A disc or a video cassette was not inserted.

−A protected disc or a video cassette without a secure accidental erasure prevention tab was inserted.

−The remaining recording time on the video cassette was insufficient. [VHS]

––:When the drive is set to VHS, “––” is displayed.

You can also delete a programme with the following steps

1.Press [, ] to select the programme and press [OPTION].

2.Press [, ] to select “Delete” and press [OK].

To exit the timer recording list

Press [PROG/CHECK].

Programmes that failed to record are deleted from the timer recording list at 4 a.m. two days later.

28

RQT8857