Advanced Video Cassette Playback

VHS Index Search System (VISS)

The unit automatically records special index signals on a tape every time a recording is started (via [REC], or a timer recording). The index search function makes use of these index signals to help you fi nd the beginning of a desired programme quickly and easily.

While stopped or during normal play

or .

–The unit automatically starts playback after the index signal is found.

–Each press increases the number of skips. –Press [STOP] to cancel the search.

Notes

Up to 20 index signals can be searched in either direction.

If you overshoot in either direction, press the opposite button to correct.

For correct operation, make recordings of at least 5 minutes to ensure that index signals are not spaced too closely together.

S-VHS Quasi Playback (SQPB)

This unit can play tapes recorded in S-VHS.

Some picture noise may occur depending on the type of tape used.

It is not possible to fully obtain the high resolution S-VHS is capable of.

This unit cannot record in S-VHS.

Repeat Playback

When the tape reaches the end of the programme, it will automatically rewind to the beginning and play again.

During playback or while stopped

PLAY

Press and hold for about 5 or more seconds.

–Repeat Playback goes on indefi nitely until you cancel it.

–The “R ” indication appears on screen. –Press [STOP] to stop play.

Notes

Only works if there is at least 5 seconds blank space at the end of the programme.

Adjusting the Playback Picture

Manual Tracking

The unit usually makes tracking adjustments automatically, but you may need to do it manually if noise appears on a tape recorded on other equipment.

During playback

TRACKING/V-LOCK/PAGE TRACKING/V-LOCK/PAGE

CH

CH

or

Press and hold until the picture noise disappears.

To return to auto tracking:

TRACKING/V-LOCK/PAGE

CH

(simultaneously).

Tips

To remove the noise from a paused picture:

Start slow play (¼ 37), then adjust the tracking.

Notes

This function may not work with some tapes.

You can also adjust the tracking with [CH , ] on the main unit.

Vertical Locking Adjustment

Adjust the vertical synchronisation to stop the picture from shaking while paused.

While paused

TRACKING/V-LOCK/PAGE TRACKING/V-LOCK/PAGE

CH

CH

or

Press and hold until the shaking stops.

To return to the standard position:

TRACKING/V-LOCK/PAGE

CH

(simultaneously).

 

Notes

 

This function may not work with some tapes.

38

You can also adjust vertical synchronisation with [CH , ] on the

main unit.

 

 

RQT8857

Page 38
Image 38
Panasonic DMR-EZ47VEB Press and hold for about 5 or more seconds, Press and hold until the picture noise disappears