VHS and System Settings
F | To Others Setup |
C | |
U |
|
N |
|
T |
|
I |
|
O |
|
N |
|
M |
|
E |
|
N |
|
U |
|
(¼ 58, Accessing the Setup menu)
All factory default settings are indicated with “Underlined” text.
VHS
, select “VHS” ¼ ¼ , select item
¼ OK |
|
| |
Setup | Tape Length | Auto | |
| |||
Tuning | SQPB | Automatic | |
|
| ||
Disc |
|
| |
Picture |
|
| |
Sound |
|
| |
Display |
|
| |
Connection |
| SELECT | |
VHS | TAB | ||
| |||
|
| ||
Others |
| RETURN | |
|
|
Tape Length
Set the length of the tape you are using so the unit can show the correct remaining time.
[Auto | The VHS automatically distinguishes E30, |
| |
For E195 tape | |
For E260 tape | |
For E300 tape |
SQPB
To play back video cassettes recorded in
[Automatic] | This unit automatically detects the format in |
| which the recording was made and selects the |
| same format for playback. However, picture |
| distortion may appear. |
| Therefore, set to [On] or [Off]. |
[On] | Use this setting when playing back a cassette |
| tape recorded in the |
[Off] | Use this setting when playing back a cassette |
| tape recorded in the VHS format only. |
Others |
| ||
, select “Others” ¼ ¼ , select item | |||
¼ OK |
|
| |
Setup | Remote Control | DVD 1 | |
| |||
Tuning | Clock |
| |
Owner ID |
| ||
Disc |
| ||
Power Save | On | ||
Picture | |||
System Update |
| ||
Sound |
| ||
Initialize |
| ||
Display |
| ||
|
| ||
Connection | SELECT |
| |
VHS |
| ||
TAB |
| ||
|
| ||
Others | RETURN |
| |
|
| ||
Remote Control (¼ 75) | |||
[DVD 1] [DVD 2] [DVD 3] |
| ||
Clock (¼ 11)
Owner ID (¼ 10)
In order to prevent another person from using this unit if it is stolen, you can set a PIN number and input your personal information.
Once the PIN number has been set, you cannot return to the factory preset. Make sure not to forget this.
PIN number
Name
House No.
Postcode
64
Power Save
[On] [Off]
Refer to the following when “Power Save” is set to “On”.
Power consumption is minimized when the unit is turned off (¼ 94).
Startup of the unit becomes slower compared to when “Power Save” is “Off”.
When the unit is off, satellite programmes cannot be watched on the TV because the signal from the satellite receiver
connected to AV2 input terminal of this unit is not looped through. To watch them, turn on the unit. (¼ 10)
System Update
In order to update this unit, the EPG download, and support system changes made by broadcasts, this unit periodically performs software updates.
Press [OK] to show the following settings.
Update data and EPG download information are sent by an unscheduled digital broadcast. In order to receive these updates, you must be able to receive digital broadcasts.
An update will take approximately 60 minutes. While the update is in progress,
You cannot operate the unit until the update is complete. Removing the AC mains lead while the update is in progress may damage the unit.
An EPG download will take approximately 30 minutes.
While the EPG download is in progress, “GUIDE” appears on the unit’s display. The EPG download can be interrupted by switching on the unit, since the download will continue in the background.
To avoid hearing the startup sound of System Update for the unit, perform the following steps.
–Select the time for Software Update (¼ below, EPG/ Software search period).
–Set “EPG Download in Standby” and “Software Update in Standby” (¼ below) to “Off”, and update manually (¼ below, Software Update Search Now).
EPG Download in Standby
[On] | When the unit is turned off, EPG data is downloaded |
| automatically. |
[Off] |
|
Software Update in Standby
[On] | You can perform the unit updates automatically when |
| the unit is turned off. |
[Off] |
|
EPG/Software search period
Selects the time to automatically perform EPG download and updates when the unit is turned off. This can only be set when “EPG Download in Standby” and “Software Update in Standby” is set to “On”.
If there is a programmed recording set for the time you have selected, the programmed recording will be given priority.
[Automatic] The unit will give priority to searching for update data at midnight.
Software Update Search Now
Start the search for new software manually.
A new software version is announced by a message. Do not switch your unit off during the update. This could result in the loss of data. A message shows that the update has fi nished. If a new software version is not going to be broadcast until the next few days, a corresponding message also appears.
If applicable update data is found, press [, ] to select “Yes” and press [OK].
Initialize
Press [OK] to show the following settings.
Shipping Condition
This returns Setup menus to default settings, except for the ratings level, ratings password, Owner ID and Clock.
[Yes] [No]
The timer recording programmes are also cancelled.
Default Settings
This returns Setup menus to default settings, except for the programmed channels, time settings, disc language settings, ratings level, ratings password, Owner ID and remote control code.
[Yes] [No]
RQT8857
