Panasonic DMR-EZ47VEB Regarding Viera Link Hdavi ControlTM function, Connecting to a TV

You can enjoy high-quality picture and audio by adding the HDMI cable connection to the 21-pin Scart cable connection between the unit and your TV (¼ 8, 9, 66).

Connecting with an HDMI (High Definition Multimedia Interface) Terminal

When connected to an HDMI compatible unit, an uncompressed digital audio and video signal is transmitted, enabling you to enjoy high quality, digital video and audio with just one cable. When connecting to an HDMI- compatible HDTV (High Defi nition Television), the output can be switched to 1080p, 1080i or 720p HD video.

Regarding VIERA Link “HDAVI ControlTM” function

When connecting with a Panasonic TV (VIERA) or a receiver equipped with the “HDAVI Control” function, linked operations would be possible. [¼ 42, Linked Operations with the TV (VIERA Link “HDAVI ControlTM”/Q Link)]

It is recommended that you use Panasonic’s HDMI cable.

Recommended part number: RP-CDHG15 (1.5 m), RP-CDHG30 (3.0 m), RP-CDHG50 (5.0 m), etc.

Non-HDMI-compliant cables cannot be utilized.

Connecting to a TV

Set “VIERA Link” to “On” (¼ 63). (The default setting is “On”.)

Set “Digital Audio Output” to “HDMI and Optical” (¼ 63).

HDMI IN

Rear of TV

HDMI cable

(not supplied)

	COMPONENT	OUT
AV OUT	VIDEO OUT

YAV 1

VIDEO

			(TV)
			OUT
	PB	L	S VIDEO
		AUDIO	AV 2
	PR
OPTICAL		R	(EXT)

DIGITAL AUDIO OUT (PCM/BITSTREAM)

Rear of this unit

AV

Connecting with a Panasonic

TV (VIERA)

If the 21-pin Scart cable (not supplied) is connected, the following functions are available.

 Direct TV Recording (¼ 21)  Watching pictures from

satellite receiver (¼ 12)

(In this case, make sure to switch the television input to “AV”.)

21-pin Scart cable

(not supplied)

(The default setting is “HDMI and Optical”.)

To enjoy High Quality Video up- converted to 1080p, you need to connect the unit to 1080p compatible HDTV and set “HDMI Video Format” in the Setup menu to “1080p” (¼ 63).

Notes

 If connecting to equipment

that is only compatible with

2 channel output, audio with

3 channels or more will be

AV

Rear of satellite receiver

down-mixed (¼ 92) and

output as 2 channels (some

discs cannot be down-mixed).

 For display units compatible

with HDCP (High-Band width

Connecting to a TV and a Receiver

Rear of TV

HDMI INAV

	HDMI cable
	(not supplied)
Rear of receiver
HDMI IN	HDMI OUT
HDMI cable
(not supplied)
		COMPONENT		OUT
	AV OUT	VIDEO OUT
		Y	VIDEO	AV 1
				(TV)
				OUT
		PB	L	S VIDEO
			AUDIO	AV 2
Rear of this unit		PR
	OPTICAL		R	(EXT)
	(PCM/BITSTREAM)
	DIGITAL AUDIO OUT

Connecting with a Panasonic TV (VIERA)

¼above

Digital Content Protection)

that are equipped with a

digital DVI input terminal (PC

monitors, etc.):

Depending on the unit,

picture may not display

properly or at all when

connecting with a DVI/HDMI

switching cable (audio cannot

be output).

Reference

69

RQT8857