Panasonic DMR-EZ47VEB Messages, On the Unit’s Display,  TV Guide data is being downloaded

Messages

On the Unit’s Display			Page
H	, F	 An error has occurred. The number following “H” or “F” depends on the status	−
(“	” stands for a service number.)	of the unit. Check the items below and in the Troubleshooting Guide. If the
		service number still does not disappear after the check, reset the unit (¼ 75,
		“To restore the unit if it freezes”).
		 If the service numbers fail to clear, note the service numbers and contact a	−
		qualified service person.
DVD		 The remote control and the main unit are using different codes. Change the	75
(“	” stands for a number.)	code on the remote control.
GUIDE		 TV Guide data is being downloaded.	64
HARD ERR		 If there is no change after turning the unit on and off, consult the dealer	−
		where the unit was purchased.
NoCASSETTE		 You have not inserted a video cassette for the recording.	74
NoERAS		 You cannot delete items on this disc.	−
		The disc may be damaged. Use a new disc.
NoREAD		 The disc is dirty or badly scratched. The unit cannot record, play, or edit.	72
		 The disc may be incompatible or of poor quality.	70, 71
		 You have used a lens cleaner and it has finished operation. Press	91
		[ OPEN/CLOSE] on the main unit to eject the disc.
NoWRIT		 You cannot write to this disc.	−
		The disc may be damaged. Use a new disc.
FINAL		 When the screen asking if you want to finalise the disc appears, the	21
		message is displayed.
PLEASE WAIT		 Displayed when the unit is started. This is not a malfunction.	−
		 The unit is carrying out its recovery process. You cannot operate the unit	−
		while the message is displayed.
PROG FULL		 There are already 16 timer recording programmes. Delete unnecessary	28
		timer recording programmes.
PROTECT		 You have inserted a video cassette without the accidental erasure	74
		prevention tab. Use a video cassette with an accidental erasure prevention
		tab.
SW-DL		 The unit is performing a software update.	64
UNSUPPORT		 You have inserted a disc the unit cannot play or record onto.	70, 71
UNFORMAT		 You inserted an unformatted DVD-RAM, DVD-RW, +RW, an unused +R,	56
		+R DL or DVD-RW (DVD-Video format) that has been recorded on other
		equipment.
		Format the disc to use it.
		However all the recorded contents on the disc are deleted.
F74		 The HDMI connection could not be authenticated due to a transfer	−
		malfunction. Consult the dealer where the unit was purchased.
F75		 The HDMI connection could not be authenticated due to an internal data	−
		malfunction. Consult the dealer where the unit was purchased.
U59		 The unit is hot.	−
		The unit switches to standby for safety reasons. Wait for about 30 minutes
		until the message disappears.
		Select a position with good ventilation when installing the unit. Do not block
		the cooling fan on the rear of the unit.
U61		 (When a disc is not inserted) Displays when a malfunction has occurred	−
		during recording, playback or copy. This is displayed when the unit is in the
		recovery process to return to normal operation; it is not broken. Once the
		display disappears you can use the unit again.

	The message are alternately displayed.	Reference
		(Continued on the next page)

89

RQT8857