Panasonic DMR-EZ47VEB Recording from a Satellite Receiver, Satellite receiver you have connected

Recording from a Satellite Receiver

[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS]

Manual Recording

Preparation:

]RAM\ If the disc is protected, release protection (¼ 56).

[VHS] Ensure accidental erasure tab is intact.

Connect a satellite receiver to this unit’s input terminals (¼ 9).

When the output signal from the external equipment

is NTSC, change the “TV System” to “NTSC” in the Setup menu (¼ 63).

With the unit stopped.

INPUT

SELECT to select “AV2” for the

satellite receiver you have connected.

DRIVE

SELECT to select the DVD or VHS

drive.

–Insert a disc or video cassette with enough remaining blank space (¼ 72, 74).

REC MODE

to select the recording mode.

Select the channel on the satellite receiver.

REC

to start recording.

Tips

To skip unwanted parts

Press [PAUSE] to pause recording. (Press again to restart recording.)

To stop recording

Press [STOP].

Linked timer recordings with external equipment (SKY Digital STB/satellite receiver) — EXT LINK

To record programmes from a SKY Digital STB/satellite receiver using timer programming

Preparation:

]RAM\ If the disc is protected, release protection (¼ 56).

[VHS] Ensure accidental erasure tab is intact.

Make sure you connect the AV2 input terminal of this unit to “VCR Scart Terminal” of a SKY Digital STB/satellite receiver with a 21-pin scart cable (¼ 9).

Set the “AV2 Input” and “Ext Link” to match the connected equipment in the Setup menu (¼ 63).

Make timer programming on SKY Digital STB/satellite receiver.

− Refer to the equipment’s operating instructions.

DRIVE	to select the DVD or VHS	Features
SELECT
	drive.
–Insert a disc or video cassette with enough		Advanced
remaining blank space (¼ 72, 74).

EXT LINK

−The unit turns off and “EXT-L” lights on the unit’s display to indicate timer recording standby has been activated.

−While the unit is in EXT LINK standby mode or recording, most operations on this unit are prohibited ([ OPEN/CLOSE], [/l] etc.).

When you operate, press [EXT LINK] to cancel EXT LINK standby mode or recording (The unit turns on and “EXT-L” disappears.).

Tips

To cancel the external control

Press [EXT LINK] to stop recording or to cancel linked timer recording standby (The unit turns on and ‘‘EXT-L” disappears.).

Manual timer recordings (¼ 26)

Notes

In order to prevent accidental operation, press [EXT LINK] to cancel the setting after recording is fi nished.

This function does not work with some equipment. Refer to the equipment’s operating instructions.

The beginnings of recordings may not be recorded correctly in some cases.

When “Ext Link” is set to “Ext Link 2”, this function does not work if the input signal is NTSC system.

Programmes are recorded as one title on this unit when the end time of the earlier timer recording and the start time of the later

timer recording are close to each other.

[RAM] To divide the titles, go to “Divide Title” (¼ 46).

While the unit is in EXT LINK standby mode or recording, video

picture is from the AV2 input terminal irrespective of “AV1 Output” setting (¼ 63).

23

RQT8857