Panasonic DMR-EZ47VEB quick start Recording from an External Device

INPUT

SELECT

Recording from an External Device

Recording from a VCR, etc. Recording to DVD

Connect cables while both the unit and the external device are turned off.

Front of the unit

IN 2 S VIDEO VIDEO L /MONO AUDIO R

AV3 IN	S VIDEO VIDEO L /MONO AUDIO R
You can get a
sharper, clearer
picture by connecting
with an S Video cable
instead of the yellow	Yellow White Red
video cable.
S Video cable	Audio/video
	cable

[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] Perform steps − left.

Start play on the external device.

REC

at the point you want to start recording to the disc.

Recording to VHS

[VHS]

Perform steps − left.

PLAY

to bring the tape to the point at which you want to start recording from.

Preparation:

Turn on the unit.

[RAM] If the disc is protected, release protection (¼ 56).

[VHS] Ensure accidental erasure tab is intact.

When the output signal from the external device is

NTSC, change the “TV System” to “NTSC” in the Setup menu (¼ 63).

This unit cannot record NTSC signals to discs that already have PAL signal recordings.

To reduce noise in input from a video cassette

recorder, set “Copy NR” to “On” in the on-screen display (¼ 55).

DRIVE

SELECT to select the DVD or VHS drive.

–Insert a disc or video cassette with enough remaining blank space (¼ 72, 74).

REC MODE

to select the recording mode (¼ 20).

to select the input where your external device is connected.

– Front panel inputs are AV3.

PAUSE

when you reach that point.

REC

to put the unit in recording standby.

Start play on the external device.

PAUSE

to start recording at the point you desire.

Notes

When timer recording starts while recording from an external device, timer recording takes priority and recording from the external device stops.

Tips

You can also connect to the AV2 on the rear.

If the audio output of the external device is monaural, connect to L/MONO on the AV3 input terminals at the front.

To skip unwanted parts

Press [PAUSE] to pause recording. (Press again to restart recording.)

To stop recording

Press [ STOP].

24

RQT8857