ViewSonic VS12282-1A, VS12280-1A Connecting the LCD TV, Cable System or VHF/UHF Antenna System

Rear of TV VHF/UHF/CABLE input

Getting Started

Connecting the LCD TV

Cable System or VHF/UHF Antenna System

Enjoy the high-definition and standard-definition digital programming along with standard- definition analog programming.

☼

•This TV is capable of receiving unscrambled digital programming for both cable and external VHF/UHF antenna.

•We strongly recommend that you connect the antenna/cable input using a 75-ohm coaxial cable (not supplied) to ensure the best picture quality.

Cable or VHF/UHF

75-ohm coaxial cable Rear of TV

VHF/UHF/CABLE input

Cable System and VHF/UHF Antenna System

Use an optional A-B RF switch (not supplied) to switch between the cable and antenna programming, as shown below.

A-B RF switch

Cable

Antenna

☼

•Remember to set the TV/CATV setting in the TV menu to Air or Cable for the type you choose.

HD Cable Box/HD Satellite Box

You can also enjoy high-definition programming by subscribing to a high- definition cable service or a high-definition satellite service. For the optimum picture quality, be sure to connect this device to your TV via the HDMI or component video (with audio) input on the back of your LCD TV.

Contact ViewSonic service team at: http://www.viewsonic.com.au/ or call our service team: Australia 1800 880 818

ViewSonic 15 N3290w/N4290p/ N4790p