![](/images/new-backgrounds/1167692/16769243x1.webp)
Connecting a Component Video source device
Examine your Video source device to determine if it has a set of unused Component Video output sockets available:
If so, you can continue with this procedure.
If not, you will need to reassess which method you can use to connect to the
device.
To connect the projector to a Component Video source device:
1.Take a VGA
2.If you are using the VGA
connectors to the Y Cb/Pb Cr/Pr sockets on the projector.
Important
If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, check that the Video source device is turned on and operating correctly. Also check that the signal cables have been connected correctly.
RGB to component adapter (ViewSonic P/N:
Connecting an S-Video source device
Examine your Video source device to determine if it has an unused
If so, you can continue with this procedure.
If not, you will need to reassess which method you can use to connect to the
device.
To connect the projector to an S-Video source device:
1.Take an
2.Connect the other end of the
ViewSonic Pro8450w | 20 |