2My Wireless Media Gateway Access Point Gateway will not turn on. No LED’s light up.
•The power is not connected.
•Connect the power adapter to your AP and plug it into the power outlet.
IMPORTANT! Only use the power adapter that came with your Wireless Media Gateway. Using any other adapter may damage your Wireless Media Gateway.
3LAN Connection Problems I can’t access my Gateway.
•Make sure your Gateway is powered on.
•Check network connections.
•The computer you are using does not have a compatible IP Address. Be sure that the IP Address used on your computer is set to the same subnet as the Gateway. For example, if the Gateway is set to 192.168.1.1, change the IP address of your computer to 192.168.1.15 or another unique IP Address that corresponds to the 192.168.1.X subnet.
•Press Reset on the back of the Gateway to revert to the default settings.
ViewSonic Wireless Media Gateway | 66 |
