![Trim Installation Options (451 Models)](/images/new-backgrounds/180179/18017917x1.webp)
Trim Installation Options (451 Models)
Counter Balance Spring Adjustment (if necessary)
1a
1
1
2
1
2
2
Dishwasher ships with trim installed for flush installIf. needed, attach wiper gasket to dishwasher by pulling protective film off adhesive back. Apply behind hemmed edge of side trim.
1b
2
2 |
x6 | 1 |
|
2b |
Disconnect cable from hook.
Increase
tension
3
Decrease
tension
Remove spring from dishwasher.
4
1
2
To install dishwasher without trim, remove the 6 screws (3 per side) and remove trim.
If needed, attach wiper gasket to dishwasher by pulling protective film off adhesive back. Apply to leading edge of dishwasher frame. Trim gasket to fit.
Set counter balance spring connector in appropriate | Reconnect cable to hook. |
location. |
|
Note: For custom panel installation, the door may require adjustment to the preload of the counterbalance springs. Follow these steps to adjust the tension.
16 | 17 |