Table of Contents
IMPORTANT–Please Read and Follow!
Warnings & Important Information _________________________________________________________ 4
Professional
Dimensions (30” and 36”)________________________________________________________ 5
Specifications (30” and 36”) ______________________________________________________ 6
Cutout Dimensions (30”)_________________________________________________________ 7
Cutout Dimensions (36”) _________________________________________________________ 9
Dimensions (Dual 30”) __________________________________________________________ 11
Dimensions (Dual 30” and 36”) ____________________________________________________ 12
Dimensions (Dual 36”) ____________________________________________________________ 13
Specifications (Dual)_____________________________________________________________ 14
Cutout Dimensions (Dual 30”)____________________________________________________ 15
Cutout Dimensions (Dual 30” and 36”) ____________________________________________ 17
Cutout Dimensions (Dual 30” and 36”) ____________________________________________ 18
Cutout Dimensions (Dual 36”) ____________________________________________________ 19
Cabinet Information_____________________________________________________________ 21
Designer
Dimensions (30”and 36”) ________________________________________________________ 23
Specifications (30” and 36”)______________________________________________________ 24
Cutout Dimensions (30”)_________________________________________________________ 25
Cutout Dimensions (36”)_________________________________________________________ 27
Dimensions (Dual 30”)___________________________________________________________ 29
Dimensions (Dual 30” and 36”) ___________________________________________________ 30
Dimensions (Dual 36”)___________________________________________________________ 31
Specifications (Dual)_____________________________________________________________ 32
Cutout Dimensions (Dual 30”) ____________________________________________________ 33
Cutout Dimensions (Dual 30” and 36”) ____________________________________________ 35
Cutout Dimensions (Dual 36”) ____________________________________________________ 37
Cabinet Information_____________________________________________________________ 39
General Information ________________________________________________________________ 41
Unpacking & Moving _______________________________________________________________ 43
Installation_________________________________________________________________________ 44
Hinge Adjustment __________________________________________________________________ 45
Kickplate Installation _______________________________________________________________ 47
Door Stop Adjustment ______________________________________________________________ 48
Final Installation ____________________________________________________________________ 48
•Make sure that incoming voltage is the same as unit rating. An electric rating plate specifying voltage, frequency, wattage, amperage, and phase is attached to the product.
•To reduce the risk of fire, electric shock, or injury to persons, installation work and electrical wiring must be done by qualified people in accordance with all applicable codes and standards, including
•The installer should leave these instructions with the consumer who should retain them for local inspector’s use and for future reference.
It is your responsibility to:
•Comply with installation specifications and dimensions
•Properly install unit
•Remove any moldings or decorative panels that prevent the unit from being serviced
•Make sure that you have these materials (not provided with your unit), which are necessary for proper installation:
•1/4” (6 mm) copper tubing with shutoff valve
•6– #8 x 3” (7.6 cm) wood screws (longer screws may be required)
•1– Saddle valve (do not use
•Assure that floor will support unit, door panels and contents (approximately 1200 pounds [540 kg])
•Provide a properly grounded electrical outlet
•Assure that location will permit appliance doors to open 90˚ minimum
WARNI NG
ELECTRICAL SHOCK
HAZARD
Disconnect power or turn power disconnect switch to OFF position before removing top grille. Failure to do so can result in death or electrical shock.
Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol. This symbol alerts you to hazards that can kill or hurt you and others.
All safety messages will be preceded by the safety alert symbol and the word“DANGER” or “WARNING.”These words mean:
DA NG ER
You will be killed or seriously injured if
you don’t follow instructions.
WARNING
You can be killed or seriously injured if
you don’t follow instructions.
All safety messages will identify the
hazard, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
WARNING
TIP OVER HAZARD
Appliance is top heavy and tips easily when not completely 
installed. Keep doors closed until appliance is completely installed
and secured per installation instructions.
Use two or more people to move and install appliance. Failure to do so can result in death or serious injury.
Performance Checklist ______________________________________________________________ 50
Control Panels _____________________________________________________________________ 51
Service & Registration_______________________________________________________________ 52
Most of the unit’s weight is at the top. Extra care is needed when moving the unit to prevent tipping. Use cardboard shipping material or plywood under unit until it is installed in the operating position to protect floor surface.
4
