Cleaning and Maintenance

Burner Head

If ports on burner head are clogged, clean with a straight pin. DO NOT enlarge or distort the ports. DO NOT use a toothpick to clean the ports. When replacing burner head, carefully align the 2 tabs underneath the burner head with the outside edge of burner base. Make sure the tabs are not aligned with the igniter and the burner cap is level.

Note: For stubborn stains, use a non abrasive cleanser such as Bon Ami™ and a soft brush or soft Scotch Brite™ pad.

Cleaning Tip: For difficult to clean burner caps and heads, place parts in a zip seal bag with ammonia.

Burner Base

The base should be wiped regularly with hot soapy water at the end of each cooling period. DO NOT use steel wool, abrasive cloths, cleanser, or powders. To remove encrusted materials, soak the area with a hot towel to loosen the material, then use a wooden nylon spatula.

DO NOT use a metal knife, spatula, or any other metal tool to scrape the aluminum base.

Wipe up any spills which remain on the sealed top surface.

Replace burner cap, burner head, and grates after drying thoroughly.

Control Panel

DO NOT use any cleaners containing ammonia or abrasives. They could remove the graphics from the control panel. Use hot, soapy water and a soft clean cloth.

Oven Surfaces

Several different finishes have been used in your oven.

NEVER USE AMMONIA, STEEL WOOL PADS OR ABRASIVE CLOTHS, CLEANSERS, OVEN CLEANERS, OR ABRASIVE POWDERS. THEY CAN PERMANENTLY DAMAGE YOUR OVEN.

Self-Clean

Your oven features a self-clean cycle for the oven interior. See the "Self-Clean Cycle" section for complete instructions.

Product Care

Cleaning and Maintenance

Control Knobs

MAKE SURE ALL THE CONTROL KNOBS POINT TO THE OFF POSITION BEFORE REMOVING. Pull the knobs straight off. Wash in detergent and warm water. Dry completely and replace by pushing firmly onto stem. DO NOT use any cleaners containing ammonia or abrasives. They could remove the graphics from the knob.

Stainless Steel Parts

All stainless steel body parts should be wiped regularly with hot soapy water at the end of each cooling period and with a liquid cleaner designed for that material when soapy water will not do the job. DO NOT use steel wool, abrasive cloths, cleansers, or powders. If necessary, scrape stainless steel to remove encrusted materials, soak the area with hot towels to loosen the material, then use a wooden or nylon spatula or scraper. DO NOT use a metal knife, spatula, or any other metal tool to scrape stainless steel. DO NOT permit citrus or tomato juice to remain on stainless steel surface, as citric acid will permanently discolor stainless steel. Wipe up any spills immediately.

Glass Surfaces

Clean with detergent and warm water. Glass cleaner can be used to remove fingerprints. If using glass cleaner ammonia, make sure that it does not run down on exterior door surface.

Broiler Pan and Grid

Clean with detergent and hot water. For stubborn spots, use a soap- filled steel wool pad.

Oven Racks

Clean with detergent and hot water. Stubborn spots can be scoured with a soap-filled steel wool pad.

WARNING

BURN OR ELECTRICAL SHOCK HAZARD Make sure all controls are OFF and oven is COOL before cleaning. Failure to do so can result in burns

or electrical shock.

Product Care

36

37

Page 19
Image 19
Viking D3 manual Burner Head, Burner Base, Control Panel, Oven Surfaces, Self-Clean, Control Knobs, Stainless Steel Parts

D3 specifications

The Viking D3 is a cutting-edge vehicle known for its robust design and advanced features, making it a standout choice in the off-road segment. This model is particularly favored among adventurers and outdoor enthusiasts due to its ability to tackle various terrains with ease.

One of the key characteristics of the Viking D3 is its powerful engine. Equipped with a high-performance engine, it delivers impressive torque and horsepower, which translates into exceptional acceleration and pulling power. This capability allows drivers to navigate challenging landscapes, from rugged mountain trails to muddy fields, without compromising performance.

The Viking D3 is built on a durable chassis designed for stability and strength. Its reinforced frame provides the necessary support to endure heavy loads and tackle harsh environments. Additionally, the vehicle features a sophisticated suspension system that enhances ride comfort, absorbs shocks from uneven surfaces, and ensures optimal traction.

Incorporating cutting-edge technologies is another highlight of the Viking D3. It comes equipped with advanced safety features, including electronic stability control and anti-lock braking systems, which contribute to safer driving experiences. The vehicle also often includes modern navigation systems and connectivity options, allowing users to stay connected even in remote areas.

User comfort and convenience are enhanced by the Viking D3's spacious interior. The ergonomic seating design provides ample legroom and headspace for both the driver and passengers, while storage compartments are strategically placed for easy access to gear and essentials.

The Viking D3 also emphasizes versatility with its multi-functional capabilities. Users can customize the vehicle with various accessories, from additional seating to specialized equipment for specific activities like hunting or hiking. This adaptability makes the Viking D3 a practical choice for those seeking both leisure and work-related functionalities.

Furthermore, the Viking D3 is designed with fuel efficiency in mind. The integration of eco-friendly technologies helps optimize fuel consumption, making it a more sustainable option for off-road adventures.

In summary, the Viking D3 represents a perfect balance of power, technology, and comfort. Its robust construction, advanced features, and versatility make it an excellent choice for those looking to explore the great outdoors with confidence and style. Whether navigating through dense forests or cruising along scenic routes, the Viking D3 is engineered to deliver an unparalleled driving experience.