ELECTRICAL CONNECTION
WARNING
Electrical Shock Hazard
Failure to follow these instructions could result in fire or electrical shock.
Electrical Requirements
A 115 volt, 60 Hz, AC only 15 amp fused electrical supplyis required. (A time delay fuse or circuit breaker is recommended.) It is recommended that a separate circuit, serving only thisappliance, be provided.
•ELECTRICAL GROUND IS REQUIRED ON THIS APPLIANCE.
•DO NOT UNDER ANY CIRCUMSTANCES REMOVE THE POWER SUPPLY CORD GROUND PLUG.
•DO NOT USE AN EXTENSION CORD
| Grounding type wall | |
Power Supply | ||
receptacle | ||
with | ||
| ||
grounding plug |
| |
|
|
Recommended Grounding Methods
For your personal safety, this refrigerated beverage center must be grounded. This appliance isequipped with a 7’ (2.1m) power supply cord having a
grounding plug. To minimize possible shock hazard, the cord must be plugged into a mating
FINAL PREPARATION
1.Some stainless steel parts may aveh a plastic protective wrap which must be peeled off. The interior of the refrigerated beverage center should be washed thoroughly with hot, soapy water,rinsed and wiped dry to remove film residue and any installationdust or debris before being used. Solutionsstronger than soap and water are rarely needed.
2.All stainless steel partshould be wiped with hot soapy water. If buildup occurs, do not use steelol,woabrasive cloths, cleaners, or powders. If it is necessaryto scrape stainless steel to remove encrusted materials, soak with hot, wethscloto loosen the material, then use a wood or nylon scraper. Do not use a metal knife, spatula,r oany other metal tool to scrape stainless steel; scratches are almost impossible to remove.
WIRING DIAGRAM
UNDERCOUNTER 15” W. REFRIGERATED BEVERAGE CENTER
WARNING: ELECTRICAL
GROUNDING
INSTRUCTIONS
This appliance is equipped with a three prong grounding plug for your protection against shock hazard and should be plugged directly into a properly grounded three prong receptacle. Do not cut or remove the grounding prong from this plug.
10