LEG LEVELER INSTALLATION
READ BEFORE INSTALLING LEG LEVELERS
WARNING!
Do not lay unit on top, side, back, or front. If unit is accidentally laid in any position other than right side up, then the unit must remain in the right side up position for at least 24 hours before plugging the unit in.
1.Tip unit backwards so there is (1) foot of clearance on front of the unit. Have someone to assist you in tilt ing the unit, to prevent it from falling on you while installing the leg levelers.
2.Screw front two leg levelers into the screw impressions. Leg levelers shoudl be screwed in until snug.
3.Repeat steps 1 & 2, with the exception of tipping the unit forwards now, to screw in the back two leg levelers.
4.Your leg levelers are now installed.
5.The unit should be level from front to back and side to side. If floor conditions do not allow the unit to sit level, adjust leg leveler(s) by turning the required leg leveler(s)
Screw
Impressions
9
