Cleaning and Maintenance
Glass Surfaces
Clean with detergent and warm water. Glass cleaner can be used to remove fingerprints. If using glass cleaner ammonia, make sure that it does not run down on exterior door surface.
Brass Parts
CAUTION
All special ordered brass parts are coated with an epoxy coating.
DO NOT USE BRASS CLEANERS OR ABRASIVE CLEANERS ON ANY BRASS PARTS. All brass body parts should be wiped regularly with hot soapy water. When hot soapy water will not do the job, use every day household cleaners that are not abrasive.
Broiler Pan and Grid
Clean with detergent and hot water. For stubborn spots, use a
Oven Racks
Clean with detergent and hot water. Stubborn spots can be scoured with a
WARNING
BURN OR ELECTRICAL SHOCK HAZARD Make sure all controls are OFF and oven is COOL before cleaning. Failure to do so can result in burns or electrical shock.
Product Care
Replacing Oven Lights
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect the electric power at the main fuse or circuit breaker before replacing bulb.
WARNING
DO NOT touch bulb with bare hands. Clean off any signs of oil from the bulb and handle with a soft cloth.
1.Unscrew glass light cover.
2.Use an oven mitt during bulb removal to
protect your hand in case the bulb breaks.
3. Replace the bulb with a 120 volt,
4.Replace the light cover
5.Reconnect power at the main fuse or circuit breaker.
Power Failure
DO NOT attempt to use during power failure. Unit will not function.
Product Care
34 | 35 |
