Cleaning and Maintenance

Burner Head

If ports on burner head are clogged, clean with a straight pin. DO NOT enlarge or distort the ports. DO NOT use a toothpick to clean the ports. When replacing burner head, carefully align the 2 tabs underneath the burner head with the outside edge of burner base. Make sure the tabs are not aligned with the igniter and the burner cap is level.

Note: For stubborn stains, use a non abrasive cleanser such as Bon Ami™ and a soft brush or soft Scotch Brite™ pad.

Cleaning Tip: For difficult to clean burner caps and heads, place parts in a zip seal bag with ammonia.

Burner Base

The base should be wiped regularly with hot soapy water at the end of each cooling period. DO NOT use steel wool, abrasive cloths, cleanser, or powders. To remove encrusted materials, soak the area with a hot towel to loosen the material, then use a wooden nylon spatula.

DO NOT use a metal knife, spatula, or any other metal tool to scrape the aluminum base.

•Wipe up any spills which remain on the sealed top surface.

•Replace burner cap, burner head, and grates after drying thoroughly.

Control Panel

DO NOT use any cleaners containing ammonia or abrasives. They could remove the graphics from the control panel. Use hot, soapy water and a soft clean cloth.

Oven Surfaces

Several different finishes have been used in your oven.

Your oven features a self-clean cycle for the oven interior. See the “Self-Clean Cycle” section for complete instructions. NEVER USE AMMONIA, STEEL WOOL PADS OR ABRASIVE CLOTHS, CLEANSERS, OVEN CLEANERS, OR ABRASIVE POWDERS. THEY CAN PERMANENTLY DAMAGE YOUR OVEN.

Product Care

Cleaning and Maintenance

Control Knobs

MAKE SURE ALL THE CONTROL KNOBS POINT TO THE OFF POSITION BEFORE REMOVING. Pull the knobs straight off. Wash in detergent and warm water. Dry completely and replace by pushing firmly onto stem.

Stainless Steel Parts

All stainless steel body parts should be wiped regularly with hot soapy water at the end of each cooling period and with a liquid cleaner designed for that material when soapy water will not do the job. DO NOT use steel wool, abrasive cloths, cleansers, or powders. If necessary, scrape stainless steel to remove encrusted materials, soak the area with hot towels to loosen the material, then use a wooden or nylon spatula or scraper. DO NOT use a metal knife, spatula, or any other metal tool to scrape stainless steel. DO NOT permit citrus or tomato juice to remain on stainless steel surface, as citric acid will permanently discolor stainless steel. Wipe up any spills immediately.

Brass Parts

CAUTION

All special ordered brass parts are coated with an epoxy coating.

DO NOT USE BRASS CLEANERS OR ABRASIVE CLEANERS ON ANY BRASS PARTS. All brass body parts should be wiped regularly with hot soapy water. When hot soapy water will not do the job, use every day household cleaners that are not abrasive.

Broiler Pan and Grid

Clean with detergent and hot water. For stubborn spots, use a soap-filled steel wool pad.

Oven Racks

Clean with detergent and hot water. Stubborn spots can be scoured with a soap-filled steel wool pad. DO NOT CLEAN THE OVEN RACKS OR RACK SUPPORT USING THE SELF-CLEAN CYCLE. They could sustain damage due to the extreme heat of the Self-Clean cycle.

Product Care

46

47

Page 23 Page 25
Page 24
Image 24
Viking F20532A Burner Head, Burner Base, Control Panel, Oven Surfaces, Control Knobs, Stainless Steel Parts, Brass Parts
Page 23 Page 25

F20532A specifications

The Viking F20532A is a notable model in the realm of high-performance vehicles, showcasing a blend of advanced engineering and innovative technology. Designed for both functionality and aesthetics, this vehicle has garnered attention for its robust features, making it a popular choice among automotive enthusiasts.

One of the main features of the F20532A is its powerful engine. The vehicle is equipped with a state-of-the-art powertrain that delivers impressive horsepower and torque, ensuring dynamic performance on various terrains. This engine is designed not only for speed but also for efficiency, contributing to better fuel economy without sacrificing power.

The drivetrain of the Viking F20532A incorporates innovative all-wheel-drive technology. This feature enhances stability and traction, allowing the vehicle to perform excellently in both on-road and off-road conditions. Whether navigating through challenging landscapes or cruising on highways, the F20532A remains agile and responsive, providing a thrilling driving experience.

In terms of design, the F20532A boasts a rugged yet refined exterior. The vehicle's body is aerodynamically shaped, reducing drag and improving overall performance. The modern aesthetics are complemented by high-quality materials used in its construction, ensuring durability alongside visual appeal. Additionally, the interior is designed with driver comfort in mind, featuring ergonomic seating and user-friendly controls.

Safety is paramount in the F20532A, which is equipped with advanced safety features. It includes multiple airbags, electronic stability control, and a robust braking system that enhances the vehicle’s handling in various conditions. Furthermore, the incorporation of modern driver-assistance technologies such as lane departure warning and adaptive cruise control ensures that occupants feel secure on every journey.

Connectivity is another highlight of the F20532A, featuring an intuitive infotainment system that integrates seamlessly with smartphones. This system allows for hands-free communication, navigation, and entertainment options, keeping drivers connected while on the move.

In summary, the Viking F20532A stands out in the automotive market with its powerful engine, innovative all-wheel-drive technology, rugged but stylish design, comprehensive safety features, and advanced connectivity options. This vehicle exemplifies the perfect balance of performance, versatility, and comfort, making it an excellent choice for those seeking adventure without compromising on luxury. As the automotive industry continues to evolve, the F20532A positions itself as a strong contender, appealing to a wide range of drivers.
Top Page Image Contents