Replacing Oven Lights
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect the electric power at the main fuse or circuit breaker before replacing bulb.
WARNING
DO NOT touch bulb with bare hands. Clean off any signs of oil from the bulb and handle with a soft cloth.
DO NOT touch bulb with bare hands. Clean off any signs of oil from the bulb and handle with a soft cloth.
Door Removal |
|
WARNING | 1 |
TO PREVENT |
|
PERSONAL INJURY |
|
Before removing the doors, |
|
make sure the pins are |
|
properly installed in the hinges. |
|
Failure to do so can result in |
|
personal injury to hands |
|
and/or fingers. |
|
| Open door completely. |
| Place pin in pin hole. |
2 | 3 |
1.Unsnap glass light cover using a screwdriver in the access groove.
2.Firmly grasp light bulb and pull out.
3.Replace with halogen bulb using volt and wattage requirements listed on glass cover.
4.Replace the light cover by snapping glass cover onto metal box.
5.Reconnect power at the main fuse or circuit breaker.
Product Care
glass light
cover
access 
groove
light 
bulb 
Remove hinge trim screws | Close until pins stop door. |
and hinge trim. |
|
4
Lift door up and out. ProductCare
50 | 51 |
