Viking VEDO130BK, VESO5302SS, VEDO5302 Clocks and Timers Analog Clock, To program the Min/SecTimer

Product Controls

Clocks and Timers (Digital Display)

3.Set the Oven Function selectorto the desired function – BAKE, CONVECTION BAKE, OR TRUCONVEC™, etc.

4.Set the temperature control knob to thedesired baking temperature.

5.The automatic time bake program is now set!

NOTE: The display will continue toshow the amount of bake time that was programmed (this will remainuntil the programmed start time is reached). You can return the display to clo ck mode by pressing the “CLOCK” button – Notice that a small clock will be displayed in the upperright cornerto indicate that aprogram is in progress.Switch back to the timer mode by pressing the “BAKE HOURS” button.

6.When the specified time is reached, the ovenwill automatically turn on. It will bake for the programmedamount of time at the selected temperature.

NOTE:At oneminute from theend ofthe specifiedbake program, the oven timer will beep once. At the end of the specified bake program, the ov en will automatically turn off and the timer will sound a series of three beeps. Thiswill continue untilthe “START TIME” button is pressed. The display will then return todisplaying the time.

NOTE: Settingthe remaining duration time to :00 will cancel the Automatic Bake program.

Clocks and Timers (Analog Clock)

Setting the Min/Sec Timer

The Min/Sec Timer is designed for accurate timing and is ideal for baking delicate items such as biscuits, cookies, and popovers, and for precise broiling. The Min/Sec timer can be used at the same time the Bake Hours or Start Time functions are in use. It can be used for timing up to 24 hours.

To program the Min/SecTimer

1.Push and release the “min/sec timer” button.

2.Rotate “Set” knob until desired duration of time is displayed. Timer starts seconds after “Set” knob stops rotating. A tone indicates the timer has started.

When the timer has one minute remaining, the timer will sound twice and begin to countdown by seconds. A tone will sound three times indicating the time is complete and twice every ten seconds after completion until timer function is cleared.

NOTE: Press any function button to clear a completed cycle or function.

Product Controls

18 19