40 Recording and Playing Back

current recording will be stopped the moment the current pro- gram ends; likewise, once the After next program option is se- lected, the current recording will be stopped the moment the next program ends.

Selecting the Record pause command pauses recording. When

you press button again to display the recording control box, the Record continue command is displayed instead. Se- lecting the Record continue command resumes recording.

To stop recording, press button. Then a confirmation box like the next figure appears, which shows the information of programs being recorded at the moment. Select a program you want to stop.

After a recording is started, you can switch over to and watch any other service during the recording. To record another ser- vice additionally, switch over to a service you want to record,

and press button.

Once a recording is started, it is put on the recording file list even though it is not finished yet. The recording file is named after its service name with a suffix of a number. To display the

recording file list, press button. For detailed description about the recording file list, refer to § 7.2.

7.1.2 Making a timer recording

You can make a program to be recorded at a specific time. Even If the digital receiver is off, it will be turned on and start recording at a time specified. The digital receiver will be turned off again as the recording ends.

Page 48
Image 48
Topfield TF 5000 manual Making a timer recording