7.1Recording a program 39
7.1 Recording a program
Circle
Oncea recording is started, a recording symbol like
the next figurewill be displayed on the right top of
the screenfor a few seconds. When you arewatch-
ing a service different from the service being recorded, you
can view a number on the center of the symbol, which indi-
catesthe order that the recording is started. The outer circle of
therecording symbol indicates progress rate.
NOTE When a recordingis finished, it might not be saved if
itsrecording duration is less than 1 minute.

7.1.1 Immediaterecording by the remote control

Torecord a program you are watching at present, press
button.
To pause recording, press button. To resume it, press
buttonagain.
After a recording is started,
pressing displaysarecord-
ingcontrol box like the next fig-
ure, in which you can specify
its duration on which it will be
ended.
A current recording will be stopped after the time set to the
Duration parameter. If the information about the next pro-
grams is provided throughthe electronic program guide, the
After this program and After next program options would be
available. Once the After this program option is selected, the