12 Installation
Connectingto the terrestrial antenna
Connectthe antenna cable to the ANT 1 IN socket on the digital
receiver,and then connect the RF LOOP 1 OUT socket and the
ANT2 IN socket with a loop-through cable.
If you have another digital receiver, plug another cable into
the RF LOOP 2 OUT socket on the digital receiver and the
correspondingsocket on the other digital receiver.
Connectingto the television by SCART connector
Pluga SCART cable into the TV socket on the digital receiver
andthe corresponding SCART socket on your television.
Connectingto the television by RCA connector
Plug a RCA cable into the VIDEO (yellow), AUDIO L (white)
andAUDIO R (red) sockets on the digital receiver and the cor-
responding input sockets on your television or audio appli-
ance.
Connectingto the television by S-Video connector
Pluga standard S-Video cable into the S-VIDEO socket on the
digital receiver and the corresponding input socket on your
television. You must connect audio sockets on the digital re-
ceiver with ones on your television by a RCA cable because
theS-video socket outputs only video signals.
Connectingto the video recorder by SCART connector
Plug one end of the SCARTcable into the VCR socket on the
digital receiver. Then, plug the other end of the SCART ca-
ble into the input SCART socket on your video recorder if
you wish to record a broadcasting programwith your video
recorder; otherwise if you wish to watch the video that the
video recorder plays back just through the digital receiver,
plugthe other end into the output SCART socket.