7.5Playing a MP3 51
7. Select the Savecommand, then the block is stored. The
storedfile will named after its source file with a suffix of
‘CUT’and a number
In addition, you can copy a recordingfile in whole or in part
whenplaying back it.
1. Startplayback of a recording file you want.
2. Finda desired position from which a copy will be started
with buttonor button.
3. Press button.
4. Pressing buttonstops copying. The copied file will
benamed after its source file with a suffix of ‘COPY’ and
anumber.
Circle
Once a copy is started, a copying symbol like the
next figurewill be displayed on the right top of the
screenfor a few seconds. To see copying status, press
button. The outer circle of the copying symbol indicates
progressrate.
NOTE If copying time is less than about 1 minute, the copy-
ing will not be done successfully. It is recommended
notto change the playback speed.
7.5 Playing a MP3
Toplay a MP3 file with the digital receiver, you have to trans-
fer your MP3 files to the digital receiver from your personal
computer. For how to transfer your MP3 files to the digital
receiver,refer to § 9.3.
Toplay a MP3 file, perform the following steps:
1. Press button, and then press button or
buttonto display the MP3 file list.