Cutout Dimensions (500 Series 42”W. Grill)
Gas inlet and power cord location area
Cutout Dimensions (500 Series 54”W. Grill)
Gas inlet and power cord location area
7 | 5” cm) | |
(12. 5” | .7 | |
cm) | ||
(12 | ||
|
28” | 40- |
| ||
| .1 | cm) | (102.1/4” | |
(71 |
| 2 | cm) | |
|
| |||
|
|
|
|
36” |
| *Solid |
|
| |
|
|
| |||
|
|
| |||
|
|
|
| ||
(91. |
|
|
| bottom |
|
4 | cm) |
|
| support | |
|
|
| |||
|
|
|
| ||
|
|
|
|
| |
|
|
|
|
|
|
(7. | 3” |
| Electrical connection | ||
| for rotisserie motor | ||||
6 | cm) | min. | (position unit so that | ||
|
|
|
| ||
|
|
|
| the plug is always | |
|
|
|
|
| |
|
|
|
|
| accessible) |
|
|
|
|
|
|
|
|
|
|
|
|
7 | 5” cm) | |
(12. 5” | .7 | |
cm) | ||
(12 | ||
|
28” | 52- |
| ||
| .1 | cm) | (132.1/4” | |
(71 |
| 7 | cm) | |
|
| |||
|
|
|
|
36” | *So | lid |
|
| |
(91. |
|
|
|
|
|
4 | cm) |
|
| bottom |
|
|
|
| support | ||
|
|
|
|
|
Electrical connection for rotisserie motor (position unit so that the plug is always accessible)
(7. | 3” |
|
6 | cm) | min. |
| ||
|
|
Electrical connection
for power supply cord on 500 Series to be located on rear wall with a maximum distance of 2’ (61.0 cm) beneath solid bottom support.
**Access | door |
|
| opening | |
|
|
10- |
|
(26.1/4” | |
0 | cm) |
|
.1/2 |
| ” | |
1 |
| ||
( |
| 1/2 | cm) |
2 | ” | ||
cm) | .2 | ||
|
| (1 |
|
Countertop typically requires 1/2” wide by 1/2” deep notch cutout on each side of grill.
This allows grill CP to sit back properly in the cutout.
Electrical connection
for power supply cord on 500 Series to be located on rear wall with a maximum distance of 2’ (61.0 cm) beneath solid bottom support.
**Access | door |
|
| opening | |
|
|
10- |
|
(26.1/4” | |
0 | cm) |
|
.1/2 |
| ” | |
1 |
| ||
( |
| 1/2 | cm) |
2 | ” | ||
cm) | .2 | ||
|
| (1 |
|
Countertop typically requires 1/2” wide by 1/2” deep notch cutout on each side of grill.
*IMPORTANT
Cabinet cutout must have a solid bottom to support the full weight of the unit.
**Access Doors sold separately - refer to access door installation instructions for correct dimensions.
*IMPORTANT
Cabinet cutout must have a solid bottom to support the full weight of the unit.
**Access Doors sold separately - refer to access door installation instructions for correct dimensions.
This allows grill CP to sit back properly in the cutout.
20 | 21 |