Removing Trim Rings

Hold the tweeter housing while gently turning the trim ring in a clockwise direction until it releases. The trim ring can then be easily lifted away from the tweeter housing.

Installing Trim Rings

„Flush Mount Assembly - With the arrow in the tweeter housing facing up, place the trim ring into the

CROSSOVER INSTALLATION

Review the Installation Precautions section of this guide before proceeding.

Crossover Adjustment and Wiring Connections

This Viper crossover has the ability to work in car audio systems from basic single amplifier systems to the most sophisticated multiple amplifier systems with signal processors and amplifier channels dedicated to each speaker.

Control Switches

The control switches can be accessed under the removable elliptical cover next to the input connector. Pry up the cover to make crossover adjustments.

housing with the Viper logo at the bottom and turn in a counter clockwise direction until the trim ring clicks into place.

„Surface Mount Assembly - Insert the trim ring into the housing and turn in a counter clockwise direction until the trim ring clicks into place.

Input Switch

The input switch tells the crossover what type of amplifier system is being used.

If a single amplifier channel will power both the tweeter and the woofer, follow the Single Amplifier Input instructions. (See Figure 5.)

If an amplifier channel will power the tweeter and another channel will power the woofer, follow the Dual Amplifier Input instructions. (See Figure 6.)

Attenuation Switch

The tweeter attenuation switch can adjust the tweeters from +3 dB to -6 dB to compensate for vehicle interior and mounting location. It is used to brighten or soften the tweeter response according to listener's preference. (See Figure 5.)

© 2002 Directed Electronics, Inc

11