S T E P 3 | PINK BAG |
• Stand the weight stack tower (AB1) so that it is upright, and place it next to the center floor support. Attach the tower to the center floor support using two bolts (M10x70), four flat washers (10.2x22x2), and two nylon nuts (M10). Attach the swing arm support (AG2) to the weight stack tower using two bolts (M10x70), four flat washers (10.2x22x2), and two nylon nuts (M10). Use two bolts (M10x60), four flat washers (10.2x22x2), and two nylon nuts (M10) to secure the dual pulley brack- et (AF2) to side of weight stack tower.
• Attach two pulleys to the weight stack tower (AB1) with two bolts (M10x48), four flat washers (M10x22x2), and two nuts (M10). Tighten these two bolts.
AB1
AG2
AF2
13
