S T E P 7

R E D B A G

• Align holes in rear shield (Q03) with the holes in the brackets (Q08 & Q09) on the back side of the weight stack; loosely secure using 8 bolts (M5x10). Take the left (Q01) side shield and repeat on front side of weight stack tower using five bolts (M5x10). Tighten interior brackets. Attach the right (Q02) shield to the tower using five bolts (M5x10). Tighten all bolts.

• Place two slip-on nuts (Z36) over the holes on the side of the weight stack tower. Snap two halves of top cover (Q06 & Q07) together. With tallest point facing the rear of the machine, place the assembled top covers on top of the weight stack tower and secure using six bolts (M5x15).

Q07

Q06

Z36

Q03

Q01

Q02

17

Page 17
Image 17
Vision Fitness ST740 manual D B a G