S T E P 6 Y E L L O W B A G
•With the loop end of the cable in your hand, guide the cable through the hole in top of the weight stack tower (AB1) and around pulleys A and B. Go through other hole in weight stack tower and all the way down and around pulley C. Now guide the cable around pulleys D (loosen pulley D and make sure cable is routed between the post and the pulley) and E and through pulleys F and G. Attach loop end into the range of motion plate (AF1) by sliding a shoulder bolt (M8x12) through the bracket and loop. Secure with a nut(M8).
A
B
G
F
E
C
D
16
