
S T E P 7 | R E D B A G |
•Align holes in rear shield with the holes in the brackets on the back side of the weight stack; loosely secure using 8 bolts (M5x10). Take the left side shield and repeat on front side of weight stack tower using five bolts (M5x10). Tighten interior brackets. Repeat for the right side shield. Tighten all bolts.
•Attach two slip on nuts (Z39) to the left side of the weight stack tower (AB1). Snap two halves of top cover (Q06 & Q07) together. With tallest point facing the rear of the machine, place the assembled top covers on top of the weight stack tower and secure using six bolts (M5x15).
Q07
Q06
Z39
AB1
17