Visioneer 480 manual Scanning from OneTouch, Load And Scan Documents From The Input Tray

24VISIONEER PATRIOT 480 SCANNER USER’S GUIDE

Scanning from

OneTouch

With powerful features such as scanning with VRS and to searchable PDF at the touch of a button, OneTouch is the main interface for using the scanner and accessing these features.

LOAD AND SCAN DOCUMENTS FROM THE INPUT TRAY

When you press either the Simplex or Duplex button, documents are scanned using the scan settings indicated by the LED number. The scanned images are then sent to a software application or location (known as the Destination Application) on your computer.

Note: Always remove any staples or paper clips from documents before inserting them into the scanner’s Automatic Document Feeder. Staples and paper clips can jam the feed mechanism and scratch the internal components. Also remove any labels, stickers, or Post-It™ notes that may come off during the scanning process and get stuck in the scanner. Misuse as described here will void your scanner’s warranty.

1.Adjust the paper guide for the width of the paper, and make sure the output tray is fully extended.