Visioneer 7100 manual Checking OUT Your Scanner, To check the status of the scanner

10VISIONEER 7100 USB SCANNER INSTALLATION GUIDE

STEP 3: CHECKING OUT YOUR SCANNER

The OneTouch software adds the scanner icon to the Windows taskbar (at the bottom right corner of the computer screen). If the scanner is properly connected, the scanner icon looks like the one in this figure.

Scanner Icon

If the icon has a red X through it, the scanner is not properly connected. See the section, “If the Scanner Is Not Properly Connected” on page 11 for the steps to fix the problem.

To check the status of the scanner:

1.Place the mouse pointer on the scanner icon in the Windows taskbar.

2.Right-click the icon. The shortcut menu appears.

3.Choose About from the shortcut menu.

A dialog box confirms that the scanner is properly connected.

4. Click OK to close the dialog box. Your scanner is ready to scan.