Vivitek user manual H9080FD Remote Control, CONT, BRIGHT, Sharp

2.4 H9080FD Remote Control

Figure 2-5 shows the H9080FD remote control, and the paragraphs that follow describe its functionality.

15
14
13
12	8
11
	9
10

Figure 2-5: H9080FD Remote Control

1.ON: Use this button to turn the projector on.

2.OFF: Use this button to turn the projector off.

3.Source Selection Buttons: Press to select a video source.

HDMI1, HDMI2, RGB, COMP1, COMP2, VIDEO or S-VIDEO.

4.Cursor Keys ( , , , ):

Use these buttons to select items or settings, adjust settings or switch display patterns.

ENTER: Press to select a highlighted menu item or confirm a changed setting.

5.Aspect Ratio Selection Button: Press this button re- peatedly to select one of the following aspect ratios:

•16 : 9: For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.

•Letterbox: For viewing LaserDisc movies or non-an- amorphic DVDs on a 16:9 screen.

•4 : 3: Scales the input signal to fit 4:3 sources in the center of the screen.

•4:3 Narrow: Scales the input signal to fit 4:3 sources in the center of the screen when using an anamorphic lens.

•Native: Displays source image in its native resolu- tion without re-sizing or overscan.

6.TEMP: Press this button to adjust the color temperature.

7.OS: Press this button to switch to the next Overscan mode.

8.NR: Press this button to show or hide the Noise Reduction slider.

9.MP: Press this button to select where the OSD men- us display on the screen.

10.SWAP: Press this button to swap the PIP image with active source image.

11.PIP: Press this button to switch to the next PIP image.

12.GAMMA: Press this button to switch to the next Gamma setting.

13.CONT, BRIGHT, SHARP:

Press these buttons to show or hide the Contrast, Brightness, and Sharpness sliders.

14.USER 1, USER 2: Press these buttons to recall pre- set User display settings 1 and 2.

15.MENU: Press this button to show or hide the OSD menu.

Controls and Functions 15