20

Vertical and Horizontal Position

Proper placement of the projector relative to the screen will yield a rectangular, perfectly-centered image that com-
pletely fills the screen.
Ideally, the projector should be positioned perpendicular to the screen.
The lens center should be aligned with either the top or bottom edge of the screen areas. The lens should be centered
in the middle of the screen. See Figure 3-3.
Screen
Height Projection Distance
Ceiling
x
Lens CenterLens Center
Ceiling Installation
Screen
Height
Floor
Lens Center
Projection Distance
Floor Installation
Lens Center
x
Figure 3-3: Projector Placement
Note
When installing, ensure that you use only UL Listed ceiling mounts.
For ceiling installations, use approved mounting hardware and M4 screws with a maximum screw
depth of 8 mm (0.31inch).
The construction of the ceiling mount must be of suitable shape and strength. The ceiling mount
load capacity must exceed the weight of the installed equipment, and as an additional precaution
be capable of withstanding three times the weight of the equipment (not less than 48 kg) over a
period of 60 seconds.
insTallaTion