VIVOTEK - A Leading Provider of Multimedia Communication Solutions
20 - User's Manual
Client Settings
This chapter explains how to select the streaming source, transmission mode and saving options
at local computer. It is composed of the following four sections: Stream Options, MPEG-4 Media
Options, MPEG-4 Protocol Options and MP4 Saving Options. When completed with the settings
on this page, click Save on the page bottom to take effect.

Stream Options

The Network Camera supports MPEG-4 and MJPEG dual streams. For more information,
please refer to Video settings on page 39.

MPEG-4 Media Options

Select to stream video or audio data. This works only when the video mode is set to MPEG-4.

MPEG-4 Protocol Options

Depending on your network environment, there are four transmission modes of MPEG-4
streaming:
UDP unicast: This protocol allows for more real-time audio and video streams. However, network
packets may be lost due to network burst traffic and images may be broken. Activate UDP connection
when occasions require time-sensitive responses and the video quality is less important. Note that each
unicast client connecting to the server takes up additional bandwidth and the Network Camera allows up
to ten simultaneous accesses.
UDP multicast: This protocol allows multicast-enabled routers to forward network packets to all clients
requesting streaming media. This helps to reduce the network transmission load of the Network Camera
while serving multiple clients at the same time. Note that to utilize this feature, the Network Camera
must be configured to enable multicast streaming at the same time. For more information, see RTSP
Streaming on page 34.